The simple and economical dust extraction solution.
In this single or twin bag raw-air system, the impellor fan is situated between the woodworking machines and the filter. Via the impellor, the AAS units take in the air with its load of dust and chippings (raw air). The raw air is then pressed into the filter, capturing the dust and releasing the cleaned air.
During this process, an overpressure is imposed on the dust extraction system. This pressure can result in very fine dust being pushed through the filter and back in to the working environment making these units unsuitable for MDF dust extraction unless fitted with the optional fine dust filter.
These raw-air dust extraction systems, however, have the advantage that they are relatively cost effective due to their simple design.
Technical Specification
Suitable for a wide range of materials
Extraction capacity up to 2300 m3/h
2.2 kW / 3 Hp motor
High quality European Category L filter medium
Easy to remove dust collection sacks
Easy and cheap to install
Can be fitted with fine dust Category M filter
Dust collection bins on wheels for ease of removal
Easy and cheap to install
Automatic synchronized start system available
Model AAS 1000
Article No
195 773
Technical Data
Rated Capacity
1000 m3/h/2300 Pa
Max. delivery rate
1800 m3/h
Max. Vacuum
2700 Pa
Filter surface area / Filter Category
2.2 m2 / Cat.G
Max. chip collection capacity
175 Litres
Motor rating 50 Hz
2.2 kW / 400 V
Weight
55 kg.
Dimensions LxWxH in mm
1140 x 570 x 2185
Extraction port diameter on unit
160 mm
Model AAS 2000
Article No
195 774
Technical Data
Rated Capacity
1500 m3/h/2300 Pa
Max. delivery rate
2300 m3/h
Max. Vacuum
2700 Pa
Filter surface area / Filter Category
2 x 2.2 m2 / Cat.G
Max. chip collection capacity
2 x 175 Litres
Motor rating 50 Hz
2.2 kW / 400 V
Weight
65 kg.
Dimensions LxWxH in mm
1810 x 570 x 2185
Extraction port diameter on unit
160 mm
Download Information Sheets or view our video presentations
